EdgeServer data sheet

Eponet EdgeServer 19" Data Sheet

The Eponet EdgeServer is available in a 19-inch housing.

Dimensions:
Width: 435 mm (without mounting bracket)
Depth: 330 mm (without plug)
Height: 1 U

Connections:
230V socket: IEC connector
RJ45 socket: Ethernet
RJ45 socket Purple: Potential-free contact

The connection panel can be individually configured by Eponet. The standard configuration is a 230V socket for the IEC connector and an RJ45 socket for the Ethernet connection.

EdgeServers for load management (e-mobility) also have a purple RJ45 socket for the potential-free contacts (load shedding).
The standard setting is load shedding when the contact is closed.
With the "inverted" setting, it is a "normally closed" contact, i.e. load shedding when the contact opens.

The RJ45 plug must be connected on site as follows. For a single load shedding, we recommend using PIN 1 (GND) and PIN 2 (Sense 1):

For load shedding to the EdgeServer, we recommend ordering the "load shedding connector" as well, as this enables quick connection and the green plug can be easily plugged in/out for load shedding testing: