# 

Instructions for connecting EVlink charging stations to the Eponet portal.

# Integration of EVlink AC (old version) charging station into the Eponet portal

These instructions are step 3 for connecting an EVlink AC charging station (Schneider Electric) to the Eponet portal.

Step 1 can be found at this link: [Basic instructions for integrating charging stations](https://wiki.eponet.ch/books/ladestationen/chapter/start-integration-ladestation-allgemeine-schritte)

<table border="1" id="bkmrk-software-versionen-z" style="border-collapse: collapse; width: 100%;"><colgroup><col style="width: 37.3063%;"></col><col style="width: 62.6937%;"></col></colgroup><tbody><tr><td>[![grafik.png](https://wiki.eponet.ch/uploads/images/gallery/2025-01/scaled-1680-/ruBgrafik.png)](https://wiki.eponet.ch/uploads/images/gallery/2025-01/ruBgrafik.png)

</td><td style="border-color: rgb(255, 255, 255);"><div><div class="ak-editor-panel cc-1n93efi" data-panel-type="info">  
</div></div><p class="callout success">Software versions EV Link charging station  
V3400 (electronic board and commissioning tool) and V1400 (RFID reader) have been tested and are supported by Eponet.</p>

</td></tr></tbody></table>

The EV Link is configured via the web browser. To do this, the IP address of the charging station must be entered in the browser. The standard login details are as follows.

**Username: admin**

**Password: ADMIN**

After successfully logging in, the IP address can be set or left on DHCP under "Configuration - Network".

[![grafik.png](https://wiki.eponet.ch/uploads/images/gallery/2025-01/scaled-1680-/zc9grafik.png)](https://wiki.eponet.ch/uploads/images/gallery/2025-01/zc9grafik.png)

The OCPP link is entered under "Configuration - Supervision".

OCPP link: **wss://ocpp.eponet.io/1.6J/dd60**

The "Charging station ID" must be left at the default setting.

[![grafik.png](https://wiki.eponet.ch/uploads/images/gallery/2025-01/scaled-1680-/9L8grafik.png)](https://wiki.eponet.ch/uploads/images/gallery/2025-01/9L8grafik.png)

Here are the settings for "Energy Management":

[![grafik.png](https://wiki.eponet.ch/uploads/images/gallery/2025-01/scaled-1680-/BGxgrafik.png)](https://wiki.eponet.ch/uploads/images/gallery/2025-01/BGxgrafik.png)

After making these settings, save them and restart the charging station. The charging station should then come online on the Eponet portal.

Please make a note of the serial number of your EVlink charging station (e.g. 2004XXXX). You will also need this serial number later in the Eponet portal.

**Checklist:**

- Software checked / latest version?
- OCPP installed and charging station online on the Eponet portal

[Now continue with step 4.](https://wiki.eponet.ch/books/ladestationen/page/schritt-4-ladegerat-hinzufugen-allgemeiner-schritt)

# Integration of EVlink Pro AC (new version) charging station into the Eponet portal

These instructions are Step 3 for connecting an EVlink AC charging point (Schneider Electric) to the Eponet portal.

Step 1 can be found at this link: [Basic guide to integrating charging stations](https://wiki.eponet.ch/books/ladestationen/chapter/start-integration-ladestation-allgemeine-schritte)

<table border="1" id="bkmrk-software-versionen-z" style="border-collapse: collapse; width: 100%;"><colgroup><col style="width: 37.3063%;"></col><col style="width: 62.6937%;"></col></colgroup><tbody><tr><td>[![EVB3S22N4EB_Image-IC-1360x775-3986315422.jpg](https://wiki.eponet.ch/uploads/images/gallery/2025-08/scaled-1680-/evb3s22n4eb-image-ic-1360x775-3986315422.jpg)](https://wiki.eponet.ch/uploads/images/gallery/2025-08/evb3s22n4eb-image-ic-1360x775-3986315422.jpg)

</td><td style="border-color: rgb(255, 255, 255);"><div><div class="ak-editor-panel cc-1n93efi" data-panel-type="info">  
</div></div><p class="callout success">Software versions: EV Link Pro AC charging station  
firmware version 1.6.1 has been tested and is compatible.</p>

<p class="callout info">OCPP link: wss://ocpp.eponet.io/1.6J/dd60/</p>

</td></tr></tbody></table>

The EV Link is configured via Schneider’s eSetup app.

First, check that the charging station’s firmware is at least version 1.6.1.  
If this is not the case, you can update it via the app.

[![IMG_2124.jpeg](https://wiki.eponet.ch/uploads/images/gallery/2025-08/scaled-1680-/img-2124.jpeg)](https://wiki.eponet.ch/uploads/images/gallery/2025-08/img-2124.jpeg)

To do this, click on the area marked in red.  
You can then update the firmware via the cloud or using a USB stick, which can be plugged into the charging station. You can download the relevant firmware from the official Schneider website.

[![IMG_2124.PNG](https://wiki.eponet.ch/uploads/images/gallery/2025-08/scaled-1680-/bDaimg-2124.PNG)](https://wiki.eponet.ch/uploads/images/gallery/2025-08/bDaimg-2124.PNG)

Now click on ‘Configuration’.

[![IMG_2122.PNG](https://wiki.eponet.ch/uploads/images/gallery/2025-08/scaled-1680-/img-2122.PNG)](https://wiki.eponet.ch/uploads/images/gallery/2025-08/img-2122.PNG)

Now click on ‘Monitoring’.

[![grafik.png](https://wiki.eponet.ch/uploads/images/gallery/2026-06/scaled-1680-/WqXgrafik.png)](https://wiki.eponet.ch/uploads/images/gallery/2026-06/WqXgrafik.png)

Now enable “Monitoring” and enter the URL as shown above.  
The BOX ID must be entered as shown above and corresponds to the serial number that must be entered on the Eponet portal.

Now click on “Save”. The charging station should then be shown as online on the Eponet portal.

**Checklist:**

- Software checked / up to date?
- OCPP installed and charging station online on the Eponet portal

**Advanced settings:**

Please adjust the following OCPP settings (Meter Values) for each charging station.  
On the charger dashboard, select the desired charging station and click on ‘Configuration’.

In the search window, you can filter the entries by “meter” and will now see the entries, which must look as follows:

[![grafik.png](https://wiki.eponet.ch/uploads/images/gallery/2026-06/scaled-1680-/grafik.png)](https://wiki.eponet.ch/uploads/images/gallery/2026-06/grafik.png)

You should configure/check the following settings:  
  
MeterValueSampleInterval &gt; set  
  
to 50 MeterValuesSampledData &gt; Energy.Active.Import.Register, Power.Offered, Current.Offered, Current.Import, Power.Active.Import

[Now continue with step 4.](https://wiki.eponet.ch/books/ladestationen/page/step-4-add-charger-general-step)